How to Recharge a Lost Mary BM600

August 18, 2026

An assortment of Lost Mary BM600 devices in different flavours

Quick answer: To recharge a Lost Mary BM600 vape, locate the USB port at the base of the device, then plug in a USB-C cable and charge via a wall adaptor or computer/laptop. The device's LED indicator will illuminate, indicating that it's charging, and will eventually turn off once fully charged.

If you're new to vaping, knowing how to recharge a Lost Mary BM600 prefilled pod kit can help you get the most out of your device. Fortunately, charging your BM600 is super-easy once you know how, so in this article, we explain how to charge your BM600 vape, when to recharge it and what to do if it isn't charging.

How to recharge a Lost Mary BM600 prefilled pod kit

Recharging your Lost Mary BM600 is an easy process that can be done in just a handful of steps. If you notice your vape battery is running low, this can be charged through the USB port at the base of your device. Simply follow the steps below to safely recharge your device and get it back to full power.

Step 1 – Locate the USB port

The USB port will be found at the bottom of your device. This is where you'll connect the power to charge your kit.

Step 2 – Connect the USB-C cable

The Lost Mary BM600 kit doesn't usually include a USB-C cable with the kit, but it will work with most modern phone chargers. Ensure that the cable is clean and free from damage for smooth and consistent power. Plug the USB-C cable into your device, before plugging the other end into a reliable power source, like a wall adaptor or laptop.

Step 3 – Locate the LED indicator

Once your vape starts charging, the LED power indicator should illuminate. You will find the LED light right next to the USB charging port on the base of your device.

Step 4 – Leave your device to charge

Once your device is charging, you can leave it to recharge until the battery is full. We advise not to leave your kit fully charged and connected to power for too long, as the BM600 only contains a small 360mAh battery which can degrade over time.

Step 5 – Remove the USB cable

Once your device is fully charged, disconnect the cable from both your device and the power source. When disconnecting the cable, we recommend pulling it via the head of the cable rather than the cable itself to prevent damage to the cable or its internal wiring.

How do I know when my Lost Mary BM600 is charged?

You will usually know that your BM600 is charged via the LED light at the base of your device. Once the light turns off, this is the sign that your kit is charged and ready to use. At this point, we recommend disconnecting your USB-C cable, as leaving the kit powered for extended time can slowly reduce the battery's lifespan.

How long does it take to charge the Lost Mary BM600?

It typically takes the Lost Mary BM600 around 30-60 minutes to fully charge, depending on the power source and how much power is left. For the best results, we recommend using a standard USB-C cable and a reliable power source. Always keep an eye on the LED light, which will turn off once fully charged.

How do I know when to recharge my Lost Mary BM600?

At first, you will often notice a loss of vapour in your draw. If this happens, check the LED light at the bottom of your kit immediately after taking a draw. If you see that the light is flashing, this is usually a sign that your battery is low and needs recharging.

Why is my Lost Mary BM600 not charging?

There are a handful of possibilities why your Lost Mary BM600 isn't charging, which may be a damaged cable, faulty battery or an unreliable power source. Here is a breakdown of the possible reasons why your BM600 isn't charging.

Damaged Cable

If a USB-C cable has had a lot of use or has been handled carelessly, this can cause the wires to tear or damage over time. Make sure the cable is unplugged, before checking for any visible signs of tear. If you notice any considerable damage on the cable, either find or purchase a new USB-C cable.

Dirty USB Port

Over time, your device's USB port may collect dust or debris, particularly when kept in your pocket. This can restrict the power supply to your device so it's important that this is kept clean. Try blowing into the port to clear any loose debris. Avoid inserting any sharp objects into the port as this can damage your device and affect any power connection.

Faulty Battery

If your device has received repeated rough handling or a major trauma, this can cause the battery to malfunction. When your device has been dropped, this can cause the battery to struggle to hold a charge or stop charging altogether. If your kit is showing noticeable swelling or excessive heat, do not attempt to recharge it, as it may have a damaged battery.

Insufficient Power Source

Sometimes the reason your BM600 isn't charging could be down to the power source itself. A faulty wall adaptor or laptop port may not provide enough power to effectively charge your device. Try using a different power source like a separate wall adaptor or computer to see if it makes any difference.

Still having issues?

If you've ruled out the above options, then the alternative choices are to either reach out to the relevant retailer you purchased the device from, or consider purchasing a new kit altogether.

How do I know whether my BM600 needs charging or a new pod?

Sometimes it can be difficult to tell if your BM600 device needs charging or it just needs a pod replacement. If you're noticing a loss of vapour in your draw, check the LED light on the bottom of your device. If you spot the light is flashing immediately after puffing, this is usually a sign that the battery needs charging. Plug it in to charge for a while before removing the cable and taking a draw. If you notice reduced vapour. a loss of flavour or a burnt taste after charging, this will likely mean that your pod needs replacing.

Conclusion

Learning how to recharge a Lost Mary BM600 is very simple when you know what to look for. From connecting the USB-C cable and checking the LED light indicator to knowing when your battery needs charging, we hope this guide helps you get your Lost Mary device back on track and ready to use. If you continue having problems after taking this guidance, we recommend contacting your relevant retailer for further assistance.

Your Cart

Your Cart

How to Recharge a Lost Mary BM600