SKE Crystal CL6000

The CL6000 uses a sealed pod system, so the device or pods can’t technically be refilled. The pods however can be easily replaced once empty of e-liquid, letting you continue vaping with minimal fuss.

Although the SKE Crystal CL6000 pods can’t be refilled, they can be easily replaced. To do this, first, pull the old pod and refill container from your device. Then remove the new 2ml pod and 10ml refill container from its packaging, before attaching them both together. Once that’s done, insert them into the battery of your device. You should hear a clicking noise once secured.

To get set up, first open the packaging and remove your device, 2ml pod and 10ml refill container. Next, peel off any stickers and pull the silicone plug from the mouthpiece. Then, attach the bottom of the pod and top of the refill container together, where you should hear a clicking noise once in place. Once that’s done, slot the now-combined unit into the battery of your device. Leave the device standing upright for a few minutes to let the coil saturate, and then once you’re ready, take a draw from the mouthpiece.

The SKE Crystal CL6000 refill and kit options are available in over 15 flavours. Our current list includes: Blueberry Sour Raspberry, Lemon and Lime, Sour Pineapple, Blue Razz Lemonade, Cherry Ice, Pink Lemonade, Watermelon Ice, Double Apple, Strawberry Burst, Fizzy Cherry, Fruit Gum, Peach Mango Watermelon, Grape Splash, Blueberry Raspberries, Dragon Fruit Peach Melon, Strawberry Raspberry Cherry, Berry Medley, Triple Mango, and Fresh Menthol Mojito.

Yes, the SKE Crystal CL6000 kit is a rechargeable device. It features a USB port in the base where you can insert a USB-C cable (not included) to charge up your kit. The device can be fully recharged in just 30 minutes, and the integrated OLED screen makes battery-tracking easy.

The CL6000 kit contains an 800mAh battery that will last most vapers a full day before needing a recharge. Most light vapers can expect the battery to last anywhere between 2-3 days, but this really depends on usage. The pods allow for up to 6000 puffs, giving you extended vaping without requiring a replacement.

There could be several reasons why your CL6000 isn’t working. If your device shows low battery percentage - or nothing at all - charge it back to full power. Another reason could be that your pod and battery aren’t secured - check that these are clicked securely together before taking a draw. If you’re noticing a burnt taste, your pod’s e-liquid may be running low and will require a placement. Performance can also be affected if protective stickers are still in place. If you’re not producing any vapour, this could be down to a trapped airlock - tap your device or blow through the mouthpiece to help clear the airway. If issues continue and you are still under warranty, contact your retailer for further support.